Skip to content 
Easy Seal Sandstone Sealer 5Ltr
£64.27 Incl. VAT£53.56 Ex. VAT
Protect your sandstone paving with Easy Seal clear, water-based sandstone sealer. Covers up to 25m², resists oil, water, algae, and fungal growth.
In stock
Revive and Protect with EasySeal Sandstone Sealer
Transform tired, weathered sandstone slabs into vibrant, protected surfaces with EasySeal Sandstone Sealer. This professional-grade sandstone sealer not only enriches colour but offers effective protection, making it an essential choice for homeowners and landscapers caring for sandstone paved areas.
EasySeal is a water-based, non-solvent formula that penetrates deep into sandstone pores without creating an artificial glossy film. It intensifies the natural tones while forming an invisible shield against water, oil, grease, algae, mould, and fungal growth. Thanks to its eco‑friendly composition, it’s ideal for use in outdoor spaces and is safe for the surrounding environment.
Ready to apply straight from the 5L container, EasySeal covers approximately 25m² on a single coat, depending on the stone’s porosity. It is best to apply the sealer to a dry surface. A second coat can be added wet‑on‑wet for deeper enhancement and stronger stain resistance. Touch dry in around 8 hours, fully cured within 24 hours.
Key Features of the Easy Seal Sandstone Sealer:
- Natural-Look Enhancement: Enriches sandstone’s natural tones without shine.
- Stain Protection: Repels water, oil, grease, and prevents staining from organic matter.
- Algae & Fungal Resistance: Helps maintain clean, slip-resistant surfaces.
- Environmentally Friendly: Water-based, low-VOC, non-toxic formula.
- Easy Application: Apply using roller, brush, or low-pressure sprayer.
- Single Tub Coverage: 5L treats around 25m² on first coat.
- Deep-penetrating Formula: Designed for sandstone but suitable for other porous stones.
Important Information
Before application, ensure surfaces are clean, dry, and free from existing sealers or contaminants. Shake thoroughly and apply evenly – do not exceed three coats, and always finish second coat while prior coat is still wet to avoid pooling. Ideal temperature for application is between 5°C and 35°C. Allow eight hours before foot traffic and 24 hours for full cure.
| Weight | 5 kg |
|---|---|
| Dimensions | 0.19 × 0.14 × 0.25 m |
- Sweep: Brush away leaves and debris.
- Shake: Shake well before use.
- Apply: Apply a generous, even coat with a brush, roller or garden sprayer. Mop up the excess to avoid pooling. Apply at a rate of 1L per 4-5m².
- Second Coat: For greater enhancement, apply a second coat before the first coat dries.
- Finish: Allow 8 hours before walking on the surface and 24 hours for the product to cure completely.
