Traditional Feather Edge Gate

If you’re looking for a strong, attractive, and long lasting feather edge gate, our Country gate is the perfect choice. Manufactured from high-quality pressure-treated softwood, this traditional gate combines classic styling with great weather resistance, making it ideal for gardens, side entrances and pathways. All gates are ~1.78m tall.

Made using a robust framed, ledged, and braced construction, this feather edge gate is designed to provide excellent strength and stability for everyday use. The feather edge boards create a classic appearance that complements both traditional and contemporary outdoor spaces, while the decorative capping strip provides a neat, professional finish.

Whether you’re replacing an existing side gate or creating a continuous run alongside feather edge fencing, this country gate delivers the durability and appearance you need. The pressure treatment helps protect the timber against rot and decay, ensuring years of reliable service with the correct installation and maintenance.

Our country gates are approximately 1.78m tall.

Key Features of the Country Feather Edge Gate:

• Approximately 1.78m tall gate with widths ranging from 0.76m up to 1.8m.
• Pressure-treated softwood for long-lasting protection.
• Traditional framed, ledged and braced construction.
• 125mm feather edge boards for a classic appearance.
• Decorative capping strip for a premium finish.
• Perfect for use alongside feather edge fencing.

Installation Information

When installing, leave approximately 10mm clearance between the gate and the clapping post, and 15mm on the hanging side to allow smooth operation. Although this featheredge gate is pressure treated, applying Restol UV Oil before installation will help protect the timber and maintain its appearance. As a minimum when hanging the pedestrian gates, a 2.4m x 100mm x 100mm post should be used for widths up 0.91m. Gate widths beyond that should use larger posts such as the 125mm x 125mm, 150mm x 150mm or 175mm x 175mm gates posts at 2.7m long. The wider the gate, the larger and stronger is post needed. It is recommended to install brenton bolts at the top and bottom of the gate to reduce warping when the gate it not in use. Installation recommendations are provided as guidance only, with final fitting decisions remaining the responsibility of the installer.

Important Information

As timber is a natural material, variations in colour, finish and dimensions may occur, and the timber may naturally move, split, twist, swell or shrink over time. This gate is not suitable for automation.