Water-based end grain timber preservative designed for the retreatment of cut or bored pressure-treated timber. This brush-on protection requires no topcoat. The fungicide is specifically formulated to combat wood-rotting fungi, algae, lichen, mould, and other growths on hard surfaces. It can treat exposed bare wood to Use Class 2 and UC3 standards.

When cross-cutting, notching, or boring treated timber products during installation, it is essential to apply an end grain preservative treatment to freshly exposed areas to maintain protection integrity. Building regulations mandate that all site cuts of pressure-treated timber must be re-treated.

Ideal for:
• All cut ends of pressure treated timbers
• Decking boards & joists
• Fence posts
• Top rails
• Gravel boards

Features:
• Easy application: Brush or spray applied
• Tried and tested formula
• Water based
• Metal free
• Available in three colours; Green, Brown & Clear
• Cleared for use by both professional and non-professional use by the HSE
• Reseals ‘tanalised’, pressure treated, or Vac-Vac pressure treated timbers to UC2, UC3 or UC4

Coverage:
1 litre treats 5m² of timber ~ that’s 700 50×100 deck joists!!