Skip to content 
DuraPost Bolt Down (Galvanised)
£12.23 Incl. VAT£10.19 Ex. VAT
A bolt down support, made from hot rolled steel. For fixing DuraPost Classic Posts to surfaces like masonry or concrete. Not suitable for tarmac.
In stock
A galvanised bolt down support constructed from S275 grade hot rolled steel. It enables the fixing of DuraPost produtcs to solid surfaces.
- Supports installation on solid surfaces.
- Suitable for fixing into masonry or concrete surfaces (not tarmac).
- Hot dip galvanised to standard BS EN ISO 1461:2009.
- Commonly used in driveways at roughly 1200mm heights or in compounds where the closer corners provide additional strength for taller posts.
Directions of use:
Slot the DuraPost onto the bolt down so that the post centre sits between the two ‘arms’.
Fix into the post through the largest bolt down holes.
Fix through the bolt down base securing it to the solid surface.
Recommended Fixings:
25mm H.D. 5.5 Sitemate Hex Head Self Drilling Screw with Washer.
| Weight | 1 kg |
|---|---|
| Dimensions | 0.15 × 0.08 × 0.15 m |
If for any reason you need to return an item please contact us on 01664 822293 to arrange this.
Our Cancellation and Returns policy can be seen in our Terms and Conditions.
